Terug naar blog
Handleidings 2026-11-21 BioLite 0 weergaven

Bereik zonnepaneel vergroten: Gids voor verlengkabel

Bereik zonnepaneel vergroten: Gids voor verlengkabel

Ontdek hoe de BioLite Solar Power Extension Cable je helpt je zonnepaneel verder van je powerstation te plaatsen voor een flexibele buitenopstelling.

Why You Might Need a Solar Extension Cable

When setting up a solar charging system outdoors, the best spot for your solar panel is often not the best spot for your power station. Direct sunlight, clear sightlines, and a stable surface rarely overlap. The BioLite Solar Power Extension Cable lets you place your panel where the sun is best while keeping your BaseCharge power station in a more convenient or protected location.

What the Cable Offers

  • Solar Power Extension Cable: 15 ft length (4.5 m) This gives you enough reach to move your panel from a shaded campsite into a sunny clearing while leaving your power station under a tarp or inside a tent.
    Solar Power Extension Cable
    Solar Power Extension Cable
  • Solar Power Extension Cable: Gauge: 12 AWG A thicker 12 AWG gauge reduces power loss over the 15 ft distance, so your panel's energy reaches the power station efficiently.
  • Solar Power Extension Cable: (1) High Power Pole Input/Output The single high-power pole connection matches the port on BioLite solar panels and BaseCharge stations, making the cable a straightforward plug-and-play addition.

Setting Up the Extension Cable

The supplied information covers the cable's specifications but does not include detailed step-by-step setup instructions. The following steps are based on the cable's design and typical solar charging practices.

  1. Position your solar panel: Place your BioLite solar panel in the sunniest available spot. Ensure the panel's output cable reaches the extension cable's input.
  2. Connect the extension cable: Plug the solar panel's high-power pole connector into the extension cable's input. The cable is 15 ft (4.5 m) long, giving you flexibility in routing.
  3. Route the cable safely: Lay the cable along a path that avoids foot traffic, sharp rocks, or water pooling. The 12 AWG gauge is durable, but avoiding strain and abrasion helps maintain performance.
  4. Connect to your power station: Plug the other end of the extension cable into your BioLite BaseCharge power station's solar input. The single high-power pole connection ensures a secure fit.
  5. Check the connection: Verify that your power station indicates it is receiving solar input. If not, check all connections and ensure the panel is in direct sunlight.

Where the Extension Cable Fits Best

This cable is designed specifically for BioLite solar panels and BaseCharge power stations. It bridges the distance when your panel needs to be in full sun but your power station is better off in the shade, under a shelter, or inside a vehicle. The 15 ft length handles most campsite setups, from a picnic table to a tent vestibule.

If you need more distance, consider chaining cables only if your system's voltage drop remains acceptable. The supplied information does not specify a maximum cable length for the system, so use the single 15 ft cable for a reliable, straightforward connection.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel